AEVOMIND INSIGHTS — INSTALLERS

Lone working for field engineers: what HSE expects, and what a mobile app can and cannot do

18 November 2026 · 10 min read · By the AevoMind team

HSE's lone worker guidance says employers should provide training, supervision, monitoring and support, and that the duty cannot be passed to the worker. A field service app can ask the job-level questions, record check-ins and show who has not finished, but it cannot be an alarm service, reach someone with no signal, or make the supervision decision.

The short answer

HSE’s leaflet Protecting lone workers (INDG73, first published 2020) says that as an employer “you should provide training, supervision, monitoring and support for lone workers”, and that the responsibility “cannot be transferred to any other person, including to those people who work alone”. A field engineer alone in someone else’s loft is the textbook case.

A mobile app can make the routine hard to skip: safety questions before the job starts, a check-in, and a record that exists the moment the job finishes. It cannot be an alarm service, reach someone with no signal, or decide that a job should stop. This article sets out what HSE says, what an app can carry, and where the people have to do the work.

An open loft hatch in an empty room with an aluminium ladder beneath it and a lit work lamp inside the dark loft space, standing for a job done out of sight of anyone else.
The job is out of sight of anyone else, which is the point of the guidance.

Who counts, and why engineers are the textbook case: record who is alone on which job

HSE defines a lone worker as “someone who works by themselves without close or direct supervision”. Its list of examples includes engineers, plant installation workers and service workers “visiting domestic and commercial premises”. The risk comes from being alone: the same hazards as for anyone else, but with nobody to help if something goes wrong.

The leaflet also reminds employers that the duty reaches further than payroll: where you have contracted a self-employed worker to work on your premises, you are still responsible for their health and safety. A business that uses subcontracted engineers should check how it records them.

The record that matters is which engineer is alone on which job, today. A scheduling board that already knows who is where gives you that. Our field service and mobile system captures time on site automatically, so the office can see an engineer arrive and leave without a phone call.

The risk assessment: no separate paperwork, but the job-level questions need an answer

HSE says: “There is no legal requirement to conduct a specific, separate risk assessment for lone workers.” You must include the risks to lone workers in your general risk assessment and take steps to avoid or control them. If you employ five or more workers you must write down what you found, and review it when anything changes.

The leaflet then lists questions that are really job-level: is the worker going into someone else’s home or premises, is the work in a rural or isolated area, how experienced are they, and does the worker have “adequate and reliable means of communication and a way to call for help”. A general assessment cannot answer those for a particular job at a particular address. A custom form on the engineer’s phone can ask them before work begins, with the answers stored against the job and a photo where one helps. It records the answer. It does not make the assessment: that is still the employer’s.

A smartphone lying on a dark surface with a blank green screen and a thin gold ring of light around it, standing for a check-in sent from a phone.
A check-in is a prompt from the phone, and an answer from a person.

Keeping in touch: set the check-in rhythm, and let the system notice when it breaks

HSE lists the ways to monitor: supervisors visiting; “pre-agreed intervals of regular contact between the lone worker and employer”; alarm devices; and “implementing a robust system to ensure a lone worker has returned to their base or home once their work is completed”. It adds that “Any monitoring system needs to be embedded into an organisation so it is well understood by workers.”

This is where software helps most. Our field service system lists GPS check-in and safety checks, time on site captured automatically, and live job status for the office. What the business decides, and what we would settle in an assessment, is the rhythm, who looks at the screen, and what happens when someone does not answer. We do not describe an automatic escalation here, because it is not something our system page promises.

One limit needs saying plainly. The app is offline-first: it works with no signal and syncs later. That is right for filling in a job sheet in a basement. It also means a missed or delayed check-in may simply be a phone that has not found a signal yet. Someone has to decide how long to wait and who rings whom. HSE’s separate point about a way to call for help, and about alarm devices that can be operated manually or automatically, is a decision about equipment and procedure, not something an app screen settles.

A long dark corridor with a thin gold line of light on the floor leading to a softly lit green door at the far end, standing for a route to a safe finish.
A job is not finished until the engineer is accounted for.

Supervision and training: the decision is yours, the record can be automatic

HSE says the level of supervision is “a management decision, which should be based on the findings of a risk assessment – the higher the risk, the greater the level of supervision required”. Some work may need someone else present: the leaflet gives confined spaces, where a supervisor may need to be present along with someone dedicated to the rescue role, and work near exposed live electricity conductors. Lone workers may also need to be accompanied at first where they are new to a job, in training, doing a job with specific risks, or dealing with new situations.

None of that is a software decision. Software can make the outcome visible: a form that asks whether a second person is attending and whether the engineer has been briefed, and a schedule that shows who was sent. And the guidance on training is specific that workers should be “suitably trained in the use of any technical solutions provided”. A check-in that engineers do not understand, or do not trust, protects nobody.

Dynamic judgement on site: let the engineer record it and the office respond

Engineers meet things no assessment foresaw. HSE says some employers use dynamic risk assessments, where workers make operational decisions on risks that cannot be foreseen, and is clear: “This is not a substitute for a comprehensive risk assessment.” Workers who may need to do this must be trained, consider the range of control measures, and get support for their decisions.

A form with a photo lets an engineer record what they found and what they decided, and the office see it in real time. The support is human: someone has to answer, and the engineer has to believe that stopping a job will be backed. That is a management culture question, and the record only shows whether it exists.

What software can do, and what it cannot

The chart below uses illustrative figures, not client data, for a business with about 15 field engineers.

Most of the lone working admin is phoning and piecing togetherIllustrative office hours a week for a business with about 15 field engineers, by hand and with a system
By handWith a system
Phoning engineers to check they are safe or finished10 hrs3 hrs
Finding out who was last at a site, and when4 hrs1 hrs
Collecting site risk notes after the job6 hrs2 hrs
Testing the check-in and escalation routine2 hrs1 hrs
Deciding whether a job needs two people or should stop3 hrs3 hrs

Illustrative inputs, not client data. Totals: 25 hours a week by hand against 10 with a system. Deciding whether a job needs two people or should stop does not fall, on purpose: HSE says the level of supervision is a management decision based on risk assessment. A system removes the phoning and piecing together, not the decision. Substitute hours you have measured.

Show the data
By handWith a system
Phoning engineers to check they are safe or finished10 hrs3 hrs
Finding out who was last at a site, and when4 hrs1 hrs
Collecting site risk notes after the job6 hrs2 hrs
Testing the check-in and escalation routine2 hrs1 hrs
Deciding whether a job needs two people or should stop3 hrs3 hrs

The shape matters more than the figures: phoning and piecing together shrink, while the decisions do not. Our installer platform puts scheduling, the engineer mobile app and scheme compliance on one shared record, and the field service software for installers article covers the wider job. Used well, a system can:

It cannot be an alarm monitoring service, summon help from a place with no signal, make the supervision decision, or train anyone. If you need devices designed to raise the alarm, HSE’s guidance puts that choice with the employer, and it should be tested. The details of what we would build are set in an assessment visit.

A plain glass cylinder filled with green light up to a thin gold line near the top, standing for a risk record that is complete.
A risk record that stays complete as the job changes.

Where to start this week

  1. List who works alone and where: which engineers, which kinds of job, which addresses.
  2. Check your general risk assessment names lone working, and is written down if you employ five or more.
  3. Write the check-in rule in one page: when, how, who watches, what happens at a missed check-in.
  4. Test it, including from a place with no signal. HSE says to test technical solutions and emergency procedures regularly.
  5. Ask the engineers what they would not use. A routine they work around is not a routine.

This is general information based on HSE’s leaflet INDG73 (revision 4, first published 03/20), whose web version we read on 18 November 2026. We have not reviewed HSE’s guidance on violence at work, driving at work, confined spaces, working at height or homeworkers, any standards for personal alarm devices, or guidance for Northern Ireland, and the guidance may be updated. It is not health and safety advice for a particular business.

Frequently asked questions

Are field engineers lone workers?

Usually, yes. HSE's leaflet defines a lone worker as someone who works by themselves without close or direct supervision, and its examples include engineers, plant installation workers and service workers visiting domestic and commercial premises. Whether a particular engineer is a lone worker on a given job depends on whether anyone is with them.

Do I need a separate risk assessment for lone workers?

HSE says there is no legal requirement to conduct a specific, separate risk assessment for lone workers. You must include the risks to lone workers in your general risk assessment and take steps to avoid or control them. If you employ five or more workers you must write down what you have found, and review and update it when anything changes.

What does HSE expect for keeping in touch with a lone worker?

The leaflet lists supervisors visiting, pre-agreed intervals of regular contact between the lone worker and employer, devices that raise the alarm manually or automatically, and a robust system to ensure the worker has returned to their base or home once the work is finished. It also says any monitoring system needs to be embedded in the organisation so workers understand it, and that technical solutions and emergency procedures should be tested regularly.

Can a mobile app keep an engineer safe?

An app can carry the check-in, the safety questions and the record. It cannot, on its own, be an alarm service, call for help from a place with no signal, or decide that a job needs a second person. HSE's guidance is about the whole system: assessment, training, supervision, communication and emergency procedures, with technology as one part. We describe a GPS check-in and safety checks in our field service system, and we do not claim it replaces an alarm device or someone watching for a missed check-in.

What is a dynamic risk assessment, and can it replace the written one?

It is where workers themselves make operational decisions based on risks that cannot be foreseen. HSE says it is not a substitute for a comprehensive risk assessment, and that workers who may have to make one must be trained how to, must consider the range of control measures, and must get support for their decisions.